Visprox Additives

Visprox

VXKRATERL0.03

Type
Volume
Anti crater

Additive to prevent formation of craters during printing. Add 0.1-0.3%, depending on the type of ink. Not suitable for water-based inks.

Defoamer

Additive to prevent foaming during printing. Add 0.1-0.6%, depending on the type of ink. Not suitable for water-based inks.

Anti-static additive

Additive to prevent static electricity during printing. Add 0.1-1% depending on the type of ink. Not suitable for water-based inks.

Uvi-pro flow control

Additive for UV inks to prevent formation of craters during printing. Add 0.1-0.6%.

Polyester bonding improver

Additive to improve adhesion to polyester. Add a maximum of 20% to TCI 8700 ink/hardener mix

Gelretarder CL

Not suitable for UV and water-based inks.

Mattifying paste

Reduce gloss of solvent-based inks. Depending on desired result, add 10-30%. Reduces resistance to light and outdoor longevity.

UV Tech Matt paste

Mattify UV inks. Add up to 30%. Mesh: max 140T

Flattening powder

Mattify solvent-based inks, add 4-6%. Not recommended for UV inks.

Thickening paste

Increase viscosity of solvent-based and UV inks, withoud compromising opacity. Add 1-5%, depending on the type of ink.

Gold and silver pastes

Can be added to all solvent-based inks. Add 25-35% (mass percentage) of gold paste or 10-15% of silver paste to a measured amount of clear ink. Recommended mesh: 100 T

Corona Update

Geachte bezoeker.

Aga Color Solutions heeft de volgende maatregelen genomen in het kader van de huidige situatie: Buitendienstmedewerkers en monteurs zullen alleen op uitdrukkelijk verzoek van de klanten langs komen. In samenwerking met onze leveranciers houden wij onze voorraden op peil. Onze verkoopafdeling, webshop en magazijn zijn operationeel.

Langere doorlooptijden en levertijden kunnen niet worden uitgesloten maar vooralsnog is hiervan nog geen sprake.